0 GAUGE GEAR SETS and GEARBOXES

13:1 gear set suitable for 0 gauge. Twin-start steel worm bored for 2mm shaft. Brass drive gear for 3/16" axle

Roxey Mouldings 13:1 gearbox for Mashima MH1620/MH1624/MH1626/MH1628 motors which are now out of production. Steel twin start worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

Roxey Mouldings 13:1 gearbox for TV18-33 motor (Also fits Mashima M1824 or M1833 motors which are now out of production). Steel twin start worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

20:1 gear set suitable for 0 gauge. Twin-start steel worm bored for 2mm shaft. Brass drive gear for 3/16" axle

20:1 gear set suitable for 0 gauge. 23mm long twin-start steel worm bored for 2mm shaft. Brass drive gear for 3/16" axle. Specially developed for our 0 gauge motor bogies. Extends the reach of the motor shaft.

Roxey Mouldings 20:1 gearbox for Mashima MH1620/MH1624/MH1626/MH1628 motors which are now out of production. Steel twin start worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

Can be supplied with a 1.5mm bore

Roxey Mouldings 20:1 gearbox for TV18-33 motor (Also Mashima M1824 or M1833 motors which are now out of production). Brass Drive Gearwheel, Steel Twin Start Worm. 2mm Shaft. 3/16in Axle. Motor and axle not included.

&nbs

26:1 gear set suitable for 0 gauge. Single-start steel worm bored for 2mm shaft. Brass drive gear for 3/16" axle

Roxey Mouldings 26:1 gearbox for Mashima MH1620/MH1624/MH1626/MH1628 motors which are nowout of production. Steel worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

Roxey Mouldings 26:1 Gearbox for TV18-33 motor (Also fits Mashima M1833 or M1824 motors which are now out of production). Brass Drive Gear, Steel Worm. 2mm Shaft. 3/16in Axle. Motor and axle not included.

40:1 gear set suitable for 0 gauge. Single-start steel worm bored for 2mm shaft. Brass drive gear for 3/16" axle

Roxey Mouldings 40:1 gearbox for Mashima MH1620/MH1624/MH1626/MH1628 motors (Motors now out of production). Steel worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

Roxey Mouldings 40:1 gearbox for TV12-27 motor. Brass worm for 1.5mm shaft, brass gear wheel for 3/16in Axle. Motor and axle not included.

Because the motor mounting holes are offset by 30 degrees the motor fixes to the frame skewed to t

Roxey Mouldings 40:1 Gearbox for TV18-33 motor and Mashima 1833/1824. Brass Drive Gear, Steel Worm. 2mm Shaft. 3/16in Axle. Motor and axle not included.

Markits Two Stage 40:1 gearbox for Mashima M1833/M1824 and TV18-33 motors. Steel worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

OUT OF STOCK

Markits 54:1 gearbox for Mashima M1833/M1824 motors (Available for telephone orders only). Steel worm, brass gear wheel. 2mm Shaft. 3/16in Axle. Motor and axle not included.

OUT OF STOCK