7mm SCALE COACH BOGIES and ACCESSORIES

7A145 Non-Corridor Self-Adhesive Partitions

A sheet of thirty coloured non-corridor partitions. Suitable for any eight foot wide coach they include picture frames with miniature views. For different combinations of picture. Lazer printed onto self-adhesive paper. Just cut them to size and s

7A146 Non-Corridor Lavatory Partitions

A sheet of twelve coloured non-corridor partitions. Suitable for any eight foot wide coach they include picture frames with miniature views. A mixture of two designs is included, some with centre door and some with side door. Lazer printed onto se

7A254 SR Maunsell 58ft Underframe (Non-Corridor)

Etched brass kit for the standard 58ft Maunsell underframe. Used under almost all Maunsell designed, steam hauled coaches. Bogies and wheels needed to complete, see options.

7A500 8ft Wheelbase Bogie Subframe

One pair. Etched brass kit. Designed to carry and give support to, cast sideframes (Not included). Wheels needed to complete

7A510 8ft Wheelbase Light Fox Bogie Frame

One pair. Etched brass frame with no castings. Can be used for GNR and other railways which used this frame. Wheels needed to complete.

7A511 LSWR 8ft Wheelbase Light Fox Bogie (Leaf Spring Bolster)

One pair. Etched brass kit with cast whitemetal fittings. Standard LSWR bogie for coaches up to 50ft long. 3ft 7in Mansell Coach Disc Wheels needed to complete.

7A512 LSWR 8ft Wheelbase Light Fox Bogie (Coil Spring Bolster)

One pair. Etched brass kit with cast whitemetal fittings. Standard LSWR bogie for coaches up to 50ft long. Wheels needed to complete.

7A520 8ft Wheelbase Heavy Fox Coach Bogie (Frames only)

One pair. Etched brass kit. Fittings NOT included. Wheels needed to complete.

7A522 LSWR 8ft Heavyweight Coach Bogie-Leaf Spring Bolster

One pair etched brass bogies with whitemetal fittings, wheels and bearings extra.

7A524 SECR 8ft Wheelbase Heavy Fox Bogie (Coil Spring Bolster)

One pair. Etched brass kit with cast whitemetal fittings. Standard SECR bogie for coaches after about 1900. Wheels needed to complete. (Shown with 7W001 Roxey steel coach disc)

7A525 SECR 8ft Heavy Fox Bogie (Leaf Spring Bolster)

One pair. Etched brass kit with cast whitemetal fittings. Standard SER and SECR bogie for coaches pre-1900. Wheels needed to complete.

7A527 LBSCR Plate Bogie

7mm Scale Etched Brass Kit. One pair standard LBSCR 8ft wheelbase plate frame coach bogie. Etched sub-frame with etched detail overlay and cast whitemetal detail.

Requires 3ft 7in coach disc wheels or 3ft 7in Mansell coach wheels (Roxey

7A530 SR Standard 8ft Wheelbase Coach Bogie

One pair. Etched brass sub-frames kit with cast whitemetal sideframes and fittings. Standard Southern Railway bogie for all steam hauled coaches, both Maunsell and Bulleid design. Also used as trailing bogies on most electric units (Check prototyp

7A712 LBSCR Cast Grab Rails

8 lost wax cast brass grab rails. Suitable for upgrading all LBSCR Stroudley coach kits (Already included in 7C68 & 7C69) and later bogie coaches.

7EMU35 8ft 9in Wheelbase Motor Bogie

Etched brass kit. Includes Mashima 1833 motor, twin 20:1 gear sets and 3ft 7in finescale steel disc wheels. This does NOT include cosmetic outside frames for SR motor bogies, see options

7EMU36 8ft 9in SR bogie Frame

Etched brass kit with cast whitemetal fittings. Designed to fit Roxey motor bogie 7EMU35, see options.

7EMU51 SR Conductor Rail Chairs Whitemetal

18 Whitemetal Chairs

7EMU52 SR Conductor Rail Chairs Brass

Six lost wax brass conductor rail chairs. Currently not available.

7EMU53 SR EMU Jumpers

Complete set of lost wax brass jumper cables for one SR EMU such as 2NOL or 3SUB.