4A270 LCDR 3 Plank Open Rocking W Irons
Etches only for the floor and W irons from our LCDR 3 plank open wagon kit. Wheelbase can be varied. Will suit many prototypes. Planked on opposite side.
Does NOT include axleboxes and springs, bearings or wheels.
SBM4018 LSWR 40 Ton Bogie Ballast Hopper
4mm scale etched brass kit with whitemetal fittings and bogies. Southwark Bridge kits do not include wheels, bearings, couplings, wire, rod, vacuum or steam heat pipes. Four axles 3ft 1in (12mm) eight spoke wagon wheels needed. We can supply
SBM4021 LSWR Ballast Plough & Brake Van
4mm scale etched brass kit with whitemetal fittings and brass roof. Southwark Bridge kits do not contain wheels, bearings, couplings, wire or rod. Two axles 3ft 1in (12mm) eight spoke wagon wheels needed. We can supply 00 wheels by Markits or Alan
SBM4023 LSWR 12 Ton Ballast Hopper
4mm scale etched brass kit with whitemetal fittings. Southwark Bridge kits do not contain wheels, bearings, couplings, wire or rod. Two axles 3ft 1in (12mm) eight spoke wagon wheels needed. We can supply 00 wheels by Markits or Alan Gibson and cou
SBM4080 GWR AA1/AA3 Toad Goods Brake Van (4 or 6w) Planked Body
4mm Etched Brass Kit with brass roof and whitemetal fittings. Can be built as four wheeler or six wheeler. Southwark Bridge Kits do not contain wheels, bearings, couplings or wire. We can supply 00 wheels from Markits or Alan Gibson and three link
SBM4081 GWR AA1/AA3 Toad Goods Brake Van (6w or 4w) Plated Body
4mm scale etched brass kit with whitemetal fittings and brass roof. Can be built as a six wheeler or a four wheeler. Southwark Bridge kits do not contain wheels. bearings, couplings, rod or wire. We can supply 00 wheels by Markits or Alan Gibson a
SBM4085 GWR 12 Ton Ballast Hopper of 1893
4mm Scale Etched Brass Kit with whitemetal fittings. Southwark Bridge Kits do not contain wheels, bearings, couplings or wire. Two axles 3ft 1in (12mm) ten spoke wagon wheels. We can supply three link couplings by Markits/Romford. These hoppers we
SBM4086 GWR P7 20 Ton Ballast Hopper of 1902
4mm scale Etched Brass Kit with whitemetal fittings. Southwark Bridge KIts do not contain wheels, bearings, couplings or wire. Two axles 3ft 1in (12mm) ten spoke wagon wheels needed. We can supply three link or screw link couplings from Markits/Ro
Email: dave@roxeymouldings.co.uk
Tel: 01932 245439
Address: 58 Dudley Road, Walton-on-Thames,
Surrey KT12 2JU, England
Copyright 2022
Web Design by Perfect Page gu.